Fit finials by either gluing onto the roof with shingle glue or similar or by drilling small holes in the corners and screwing to the roof.
Glue and screws are not supplied.
A hole is pre-drilled into the top of the finial. This is for the decorative ball to be fitted if required. If the ball is not required this hole can be sealed with silicone.
Please also note, that the brass ball for our finials are an optional extra and will not come included unless this has been selected.
Please see our Roof Finial page for more details.
More Information
Answers to most questions can also be found by typing into the search bar in the widget or our info center or please contact us to help you further with any questions you have.
Comments
0 comments
Article is closed for comments.